Dynapar Encoders

Acuro Series AI25 Absolute Encoder with Interbus Interface

Up to 17 Bit single-turn resolution
4096 revolutions of multi-turn resolution
Short installation depth
Safety through self-diagnostics
Solid shaft and hollow shaft versions
-40C to +100°C Operating temperature

 

The Acuro AI25 optical absolute industrial encoder is available in a single-turn or multi-turn version. The multi-turn design is based on a reliable high-speed gear with optical scanning and the latest generation of OptoASIC technology. The mechanical concept is based on a double ball bearing design, which is available as a solid-shaft or hollow-shaft version in common shaft diameters.

Electrical

Connection: Bus Cover with spring terminal clamps, cable with connector
Single-turn Resolution:: 10, 12, 13, 14, 17 Bit
Multi-turn Resolution: 12 bit (only available with 12 bit single turn resolution)
Linearity: +/- 1/2 LSB
Absolute Accuracy: ± 0.01° mechanical (36 arc-sec.)
Repeatability: ± 0.002° mechanical (7.2 arc-sec.)
Code format: 32 bit Binary
Supply voltage: 10-30 VDC
Intrinsic current consumption: 220 mA (ST), 250 mA (MT)
Baud Rate: 500 Kbaud according to ENCOM
Interface: Interbus, ENCOM Profile K3 (parameterizable)
Programmable: Direction, scaling factor, preset, offset

Mechanical

Shaft diameter: Shaft: 6 mm, 10 mm, 3/8"
Hubshaft: 10mm, 12 mm, 3/8", 1/2"
Maximum shaft load:
6 mm shaft: 13 lb axial, 24 lb radial
10 mm shaft: 24 lb axial, 35 lb radial
Maximum shaft speed: 10,000 RPM (continuous), 12,000 RPM (peak)
Starting Torque: < 1.4 in-oz
Shaft tolerance (hubshaft only): +/- 1.5 mm axial, +/- 0.2 mm radial 
Bearing life: 1 x 1010 revolutions at 35% full rated shaft load
1 x 109 revolutions at 75% full rated shaft load
1 x 108 revolutions at 100% full rated shaft load
Flange configurations: Square, Clamp, Servo, Hubshaft with flexible tether
Weight: 350 g ST, 400 g MT

Environmental

Operating Temperature: -40 to 100° C
Storage Temperature: -40 to 100° C
Shock: 1,000 m/s2 (6 ms)
Vibration: 100 m/s2 (10 to 2,000 Hz)
Enclosure Rating: IP64 or IP67

Click Here For Complete Technical Information (176kb .pdf file)Ohio Belting and Transmission - Danaher Controls - Encoders, Totalizers and Automation Controls

Table Of Contents